Especificaciones
The 10Gbps DWDM SFP+ Optical Transceiver is designed for long-range optical communication over single-mode fiber (SMF) up to 80 kilometers. It supports data rates of up to 10.325Gbps and features an APD receiver and a temperature-stabilized DFB-EML transmitter. Housed in a hot-pluggable SFP+ form factor with a duplex LC connector, the module complies with SFP+ MSA, SFF-8431, SFF-8432, and IEEE 802.3ae 10GBASE-ZR standards. Digital diagnostic monitoring is supported via an I2C interface, enabling real-time performance tracking.
Operating on a single +3.3V power supply, the transceiver consumes less than 1.5W of power and operates within a case temperature range of -5°C to +70°C. Its RoHS6 compliance ensures an environmentally responsible design, while the compact and hot-pluggable footprint supports easy installation and upgrades.
Optically, the transmitter provides a center wavelength range based on a 100GHz ITU Grid in the C Band DWDM spectrum. It delivers an average output power between 0dBm and +3.5dBm, with an extinction ratio of 6.0dB. The receiver offers a sensitivity of -23dBm and a saturation power of -7dBm, supporting wavelengths from 1480nm to 1580nm. Features such as Loss of Signal (LOS) detection allow for enhanced operational monitoring, with LOS asserted at -32dBm and deasserted at -27dBm.
Electrically, the module features a differential impedance of 100Ω, supporting input swing differentials from 180mV to 700mV. It also provides output swing differentials from 350mV to 850mV, ensuring seamless integration with various host systems. Advanced diagnostics monitor parameters such as temperature, voltage, bias current, transmitted and received optical power, with built-in alarms for deviations from factory-set thresholds.
In summary, the 10Gbps DWDM SFP+ Optical Transceiver is a robust and efficient solution for long-distance optical networking. Its advanced features, compliance with international standards, and efficient design make it an essential component for modern telecommunications and data center infrastructures.
This DWDM SFP+ module supports 10GBASE-ZR/ZW and 10G Fibre Channel applications, operating on ITU-T 100 GHz C-band grid wavelengths. It is hot-pluggable with a duplex LC interface, compliant with SFP+ MSA, SFF-8431/8432 standards, and IEEE 802.3ae. Powered from a single 3.3 V supply, it consumes less than 1.5 W. Digital diagnostics monitoring is available via I²C (per A0h/A2h maps). The case operating temperature range is −5 °C to +70 °C, and it is fully RoHS-6 and Class 1 laser compliant.
Parámetros clave
- Factor de forma / conector: SFP+ (hot-pluggable), duplex LC.
- Velocidad de datos: 10 Gbps (10GBASE-ZR/ZW, 10G Fibre Channel).
- Optical channel: DWDM, ITU C-band grid, 100 GHz spacing.
- Alcanza: Up to 80 km over single-mode fiber.
- Tx / Rx design: Temperature-stabilized DFB-EML transmitter, APD receiver.
- Diagnóstico: Real-time monitoring of temperature, bias current, Tx/Rx optical power, and Vcc via DDMI/DOM.
- Supply / power: Single 3.3 V supply (3.14–3.46 V range); <1.5 W dissipation.
- Temperatura de funcionamiento de la caja: De -5 °C a +70 °C.
- Standards & compliance: SFP+ MSA, SFF-8431, SFF-8432, IEEE 802.3ae; RoHS-6; EN 60825-1 Class 1 laser.
Optical performance (highlights)
- Tx average output power: 0 to +3.5 dBm.
- Receiver sensitivity: ≤ –23 dBm.
- Receiver overload: –7 dBm max.
- Extinction ratio: ≥ 6 dB.
- Side-mode suppression: ≥ 30 dB.