Especificaciones
The Huawei 02311QNV Compatible Optical Transceiver is a high-performance module engineered for long-distance data communication over single-mode fiber (SMF) up to 10 kilometers. Supporting line rates from 103.125 Gbps to 111.81 Gbps, it is compliant with IEEE 802.3ba 100GBASE-LR4 standards and the CFP MSA specifications. The transceiver utilizes a 4-channel LAN WDM architecture, integrating TOSA (Transmitter Optical Sub-Assembly) and ROSA (Receiver Optical Sub-Assembly) for robust signal transmission and reception. It employs a duplex LC optical interface and a 148-pin electrical connector, facilitating seamless integration with networking equipment.
Operating with a single +3.3V power supply and consuming less than 12W of power, the module provides efficient performance across a temperature range of 0°C to 70°C. The transmitter converts 10-lane 10.3Gbps CAUI electrical inputs into 4-lane LAN-WDM 25.78Gbps optical signals, while the receiver de-multiplexes incoming optical signals into 10-lane electrical outputs. Advanced diagnostics and management are enabled through the MDIO interface, allowing for real-time monitoring and control. With its hot-pluggable design, high sensitivity, and compliance with industry standards, the Huawei 02311QNV Compatible transceiver is an optimal choice for 100Gbps Ethernet and data center interconnect applications.
The Huawei 02311QNV Compatible is a hot-pluggable CFP form factor optical module designed for 100 Gigabit Ethernet applications. It converts 10×10.3 Gb/s CAUI electrical inputs into 4×25.78 Gb/s LAN-WDM optical channels, multiplexed into a single duplex LC interface. On the receive side, LAN-WDM signals are de-multiplexed and converted back to electrical CAUI. It supports distances up to 10 km over G.652 SMF, operates from a single +3.3 V power supply, and consumes < 12 W. MDIO provides module monitoring and management, including alarms and diagnostics.
Especificaciones
- Factor de forma / normas: CFP MSA; IEEE 802.3ba 100GBASE-LR4.
- Velocidad de datos: 103.125–111.81 Gb/s supported.
- Alcanza: Up to 10 km over G.652 SMF.
- Longitudes de onda ópticas (red LAN-WDM): 1295.56, 1300.05, 1304.58, 1309.14 nm.
- Conector: Duplex LC.
- Consumo de energía: < 12 W; 3.6 A typical supply current.
- Tensión de alimentación: 3.2–3.4 V.
- Temperatura de funcionamiento de la carcasa 0 °C a 70 °C.
- Diagnostics & control: MDIO interface; DDM, alarms, programmable controls.
- Conformidad: CFP MSA Hardware & Management Interface, IEEE 802.3ba, RoHS.
Características ópticas (por carril, salvo que se indique lo contrario)
| Parámetro | Valor |
|---|---|
| Tasa de señalización | 25.78125 GBd |
| Longitudes de onda | 1295–1310 nm (LAN-WDM grid) |
| Potencia media de lanzamiento TX | −4.3 to +4.5 dBm |
| TX OMA | −1.3 to +4.5 dBm |
| Relación de extinción | 4–8.2 dB |
| Potencia total de lanzamiento | ≤ +10,5 dBm |
| TDP | ≤ 2.2 dB |
| RX avg power | −10.6 to +4.5 dBm |
| Sensibilidad RX (OMA) | ≤ −8.6 dBm |
| Sensibilidad RX estresada (OMA) | ≤ −6.8 dBm |
| LOS afirmar / desafirmar | −18 / −15 dBm |
| SMSR | ≥ 30 dB |
| Receiver damage threshold | ≤ +5.5 dBm |