Specifiche tecniche
The Huawei 02311QNV Compatible Optical Transceiver is a high-performance module engineered for long-distance data communication over single-mode fiber (SMF) up to 10 kilometers. Supporting line rates from 103.125 Gbps to 111.81 Gbps, it is compliant with IEEE 802.3ba 100GBASE-LR4 standards and the CFP MSA specifications. The transceiver utilizes a 4-channel LAN WDM architecture, integrating TOSA (Transmitter Optical Sub-Assembly) and ROSA (Receiver Optical Sub-Assembly) for robust signal transmission and reception. It employs a duplex LC optical interface and a 148-pin electrical connector, facilitating seamless integration with networking equipment.
Operating with a single +3.3V power supply and consuming less than 12W of power, the module provides efficient performance across a temperature range of 0°C to 70°C. The transmitter converts 10-lane 10.3Gbps CAUI electrical inputs into 4-lane LAN-WDM 25.78Gbps optical signals, while the receiver de-multiplexes incoming optical signals into 10-lane electrical outputs. Advanced diagnostics and management are enabled through the MDIO interface, allowing for real-time monitoring and control. With its hot-pluggable design, high sensitivity, and compliance with industry standards, the Huawei 02311QNV Compatible transceiver is an optimal choice for 100Gbps Ethernet and data center interconnect applications.
The Huawei 02311QNV Compatible is a hot-pluggable CFP form factor optical module designed for 100 Gigabit Ethernet applications. It converts 10×10.3 Gb/s CAUI electrical inputs into 4×25.78 Gb/s LAN-WDM optical channels, multiplexed into a single duplex LC interface. On the receive side, LAN-WDM signals are de-multiplexed and converted back to electrical CAUI. It supports distances up to 10 km over G.652 SMF, operates from a single +3.3 V power supply, and consumes < 12 W. MDIO provides module monitoring and management, including alarms and diagnostics.
Caratteristiche principali
- Fattore di forma / standard: CFP MSA; IEEE 802.3ba 100GBASE-LR4.
- Velocità di trasmissione dati: 103.125–111.81 Gb/s supported.
- Raggiungere: Up to 10 km over G.652 SMF.
- Lunghezze d'onda ottiche (rete LAN-WDM): 1295.56, 1300.05, 1304.58, 1309.14 nm.
- Connettore: Duplex LC.
- Consumo di energia: < 12 W; 3.6 A typical supply current.
- Tensione di alimentazione: 3.2–3.4 V.
- Temperatura di esercizio dell'involucro: Da 0 °C a 70 °C.
- Diagnostics & control: MDIO interface; DDM, alarms, programmable controls.
- Conformità: CFP MSA Hardware & Management Interface, IEEE 802.3ba, RoHS.
Caratteristiche ottiche (per corsia se non indicato)
| Parametro | Valore |
|---|---|
| Signaling rate | 25.78125 GBd |
| Lunghezze d'onda | 1295–1310 nm (LAN-WDM grid) |
| Potenza di lancio media del TX | −4.3 to +4.5 dBm |
| TX OMA | −1.3 to +4.5 dBm |
| Rapporto di estinzione | 4–8.2 dB |
| Potenza di lancio totale | ≤ +10.5 dBm |
| TDP | ≤ 2.2 dB |
| RX avg power | −10.6 to +4.5 dBm |
| Sensibilità RX (OMA) | ≤ −8.6 dBm |
| Stressed RX sensitivity (OMA) | ≤ −6.8 dBm |
| LOS assert / de-assert | −18 / −15 dBm |
| SMSR | ≥ 30 dB |
| Soglia di danno del ricevitore | ≤ +5.5 dBm |